1. Find the coax cable that runs from the cable wall outlet to your VCR. Disconnect the coax cable from your VCR. Connect this cable to the "Cable In" port on the back of the Digital Adapter.
2. Take the coax cable provided in your self-install kit. Connect this cable to the Digital Adapter "To TV" port and to the "Cable/RF In" port on your VCR.
3. Ensure coax cable is still connected from the output port on your VCR to the "Cable/RF In" port on your TV.
4. Take the power cord provided in your self-install kit. Connect the power cord to the electrical wall outlet and the "+5V DC In" port on the Digital Adapter.

1. Turn on your TV and tune it to channel 3 (Channel 4 in Cleveland area).
2. Make sure the channel "3/4" switch on the Digital Adapter is set to the same channel as your TV.

If you don't have a picture after completing the activation steps, you may need to switch your TV and Digital Adapter to channel 4.

After you have connected your Digital Adapter(s), they are ready to be activated, which will authorize your Digital Adapter(s) to begin receiving signals from WOW!'s network and send cable channels to your TV. Once your Digital Adapter(s) are activated you will be able to enjoy your WOW! Cable.

All Digital Adapters must be connected prior to activation.

---

To activate your Digital Adapter(s):

In your business: Please call 1-800-510-1110

---

Note: After activation, it may take up to 45 minutes for your Digital Adapter(s) to receive complete functionality.